Whole project now uses autotools

Energy monitor commands

-Energy monitor commands
-=======================
-
-Trigger
-    Start
-    Stop
-    On Pin
-
-Mode
-    Dual ADC
-        One current, one voltage
-    Oversampled
-        Interleaved?
-        Constant number of samples averaged
-        or dynamic?
-            PID controller for number of samples averaged
-            trapezium interpolation
-
-Resolution
-    6-12 bit
-
-Retrigger
-    Pin
-
-LEDs
-
-
-Host Features
-=============
-
-Commands
-    connect [SERIAL]
-        choose the device, list serial numbers if multiple devs
-    power
-        output power avg per second
-        until kbhit
-    start
-    stop
-        stop measurement
-        display
-            energy
-            time
-            sample/s
-            avg power
-            peak power
-    ontrigger PIN
-    mode MODE
-        dual
-        oversampled
-        normal
-    resolution RES
-        6, 8, 10, 12
-    retrigger PIN
-        assert 1 on this pin while capturing
-    graph
-        launch python graph on streaming results
-    output FILENAME
-        save output to FILENAME
-    setserial SERID
-        set the serial ID
-    setresistor
-        set the value of the shunt resistor, in ohms
-
-commands seperated by ;
-
-Cmdline
-    specify commands on the command line

host/INSTALL → INSTALL

 Installation Instructions
 *************************
 
-Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
 Inc.
 
    Copying and distribution of this file, with or without modification,
@@ -309,10 +309,9 @@ causes the specified `gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).
 
 Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf limitation.  Until the limitation is lifted, you can use
-this workaround:
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
 
-     CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
 
 `configure' Invocation
 ======================
@@ -368,3 +367,4 @@ operates.
 
 `configure' also accepts some other, not widely useful, options.  Run
 `configure --help' for more details.
+

LICENSE

-STM32F4DISCOVERY Energy Monitor
-Copyright (C) 2013 James Pallister
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
\ No newline at end of file

Makefile

-CC=arm-none-eabi-gcc
-
-FLAGS += -T libopencm3_stm32f4.ld
-FLAGS += -D STM32F4
-FLAGS += -g -fno-common -save-temps
-FLAGS += -mcpu=cortex-m4 -mthumb
-FLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
-
-SRC += energy_monitor.c
-
-HOST_SRC = host/host_receiver.o host/libusbinterface.o host/dataprocessor.o host/helper.o
-
-.PHONY: firmware hostapp all
-
-all: energy_monitor host_receiver
-
-energy_monitor: energy_monitor.c Makefile
-	$(CC) $(FLAGS) $(SRC) -o energy_monitor -lopencm3_stm32f4
-
-host_receiver:
-	cd host; ./configure
-	$(MAKE) -C host
-
-clean:
-	$(MAKE) -C host clean
-	rm -f energy_monitor

Makefile.am

+SUBDIRS=src/host src/firmware
+
+ACLOCAL_AMFLAGS= -I m4

autogen.sh

+
+autoreconf -f -i
+

host/configure.ac → configure.ac

@@ -2,20 +2,26 @@
 # Process this file with autoconf to produce a configure script.
 
 AC_PREREQ([2.69])
-AC_INIT([stm32-host-receiver], [0.0.1], [BUG-REPORT-ADDRESS])
+AC_INIT([stm32f4-energy-monitor], [1.0], [james.pallister@embecosm.com])
 AC_CONFIG_MACRO_DIR([m4])
 AC_CONFIG_AUX_DIR([build-aux])
 AM_INIT_AUTOMAKE
+AC_PROG_LIBTOOL
 LT_INIT
-AC_CONFIG_SRCDIR([host_receiver.cpp])
+AC_CONFIG_SRCDIR([src/host/host_receiver.cpp])
 AC_CONFIG_HEADERS([config.h])
 
 AC_LANG([C++])
 
-# Checks for programs.
 AC_PROG_CXX
 AC_PROG_CC
 
+AC_PROG_CC([arm-none-eabi-gcc])
+
+# TODO check if a suitable arm compiler exists
+# Check to see if it can compile code for cortex-m4f
+# Check to see if libopencm3 is available
+
 # Check for compiler flags.
 AX_CXX_COMPILE_STDCXX_11([noext],[mandatory])
 
@@ -25,8 +31,11 @@ BOOST_REGEX([n])
 BOOST_THREADS([n])
 BOOST_SYSTEM([n])
 
-AC_CHECK_LIB([readline], [main],, [AC_MSG_ERROR([Cannot find readline library. Please install it.])])
-AC_CHECK_LIB([usb-1.0], [main],, [AC_MSG_ERROR([Cannot find usb-1.0 library. Please install it.])])
+# Save libraries (don't want to compile energy_monitor with them)
+save_LIBS="$LIBS"
+AC_CHECK_LIB([readline], [main], [], [AC_MSG_ERROR([Cannot find readline library. Please install it.])])
+AC_CHECK_LIB([usb-1.0], [main], [], [AC_MSG_ERROR([Cannot find usb-1.0 library. Please install it.])])
+LIBS="$save_LIBS"
 
 # Python checking adapted from gdb's configure.ac
 # It's license, and original code can be obtained from
@@ -53,8 +62,14 @@ AC_DEFUN([AC_TRY_LIBPYTHON],
     esac
     found_usable_python=no
     AC_MSG_CHECKING([for ${version}])
-    AC_LINK_IFELSE(AC_LANG_PROGRAM([[#include "Python.h"]],
-                   [[Py_Initialize ();]]),
+    AC_LINK_IFELSE([AC_LANG_SOURCE([AC_LANG_PROGRAM(
+                    [[
+                        #include "Python.h"
+                    ]],
+
+                    [[
+                        Py_Initialize ();
+                    ]])])],
                    [have_libpython_var=${version}
                     found_usable_python=yes
                     PYTHON_CPPFLAGS=$new_CPPFLAGS
@@ -67,12 +82,18 @@ AC_DEFUN([AC_TRY_LIBPYTHON],
 AC_ARG_WITH(python,
             AS_HELP_STRING([--with-python=PYTHON], [also build host receiver as a python module (/path/to/python)]),
             [],
+            [with_python=`which python`])
+AC_ARG_WITH(python,
+            [AS_HELP_STRING([--without-python],[disable building of host receiver as a python module])],
+            [],
             [with_python=no])
+
 AC_MSG_CHECKING([whether to use python])
 AC_MSG_RESULT([$with_python])
 
 if test "${with_python}" = no; then
     AC_MSG_WARN([python module will not be compiled])
+    have_libpython=no
 else
     python_bin="${with_python}"
     if test ! -f "${python_bin}"; then
@@ -108,15 +129,8 @@ else
 fi
 AC_SUBST(PYTHON_CPPFLAGS)
 AC_SUBST(PYTHON_LIBS)
+AM_CONDITIONAL([BUILD_PYMODULE], [test x$have_libpython != xno])
 
-# Checks for header files.
-
-# Checks for typedefs, structures, and compiler characteristics.
-AC_CHECK_HEADER_STDBOOL
-AC_TYPE_SSIZE_T
-
-# Checks for library functions.
-AC_CHECK_FUNCS([sqrt])
 
-AC_CONFIG_FILES([Makefile])
+AC_CONFIG_FILES([Makefile src/host/Makefile src/firmware/Makefile])
 AC_OUTPUT

host/Makefile.am

-bin_PROGRAMS=host_receiver
-lib_LTLIBRARIES=pyenergy.la
-host_receiver_SOURCES=helper.cpp dataprocessor.cpp libusbinterface.cpp host_receiver.cpp
-pyenergy_la_SOURCES=$(host_receiver_SOURCES) pymodule.cpp
-
-host_receiver_CPPFLAGS = $(BOOST_CPPFLAGS)
-host_receiver_LDADD = $(BOOST_REGEX_LIBS) $(BOOST_THREAD_LIBS) $(BOOST_SYSTEM_LIBS)
-host_receiver_LDFLAGS = $(BOOST_REGEX_LDFLAGS) $(BOOST_THREAD_LDFLAGS) $(BOOST_SYSTEM_LDFLAGS)
-
-pyenergy_la_CPPFLAGS = $(PYTHON_CPPFLAGS)
-pyenergy_la_LIBADD = $(BOOST_PYTHON_LIBS) $(BOOST_PYTHON3_LIBS) $(PYTHON_LIBS) $(host_receiver_LDADD)
-pyenergy_la_LDFLAGS = $(BOOST_PYTHON_LDFLAGS) $(BOOST_PYTHON3_LDFLAGS) -module -shared -avoid-version $(host_receiver_LDFLAGS)
-
-ACLOCAL_AMFLAGS=-Im4

host/Makefile.in

-# Makefile.in generated by automake 1.14 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = host_receiver$(EXEEXT)
-subdir = .
-DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
-	$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/configure $(am__configure_deps) \
-	$(srcdir)/config.h.in $(top_srcdir)/build-aux/depcomp COPYING \
-	build-aux/compile build-aux/config.guess build-aux/config.sub \
-	build-aux/depcomp build-aux/install-sh build-aux/missing \
-	build-aux/ltmain.sh $(top_srcdir)/build-aux/compile \
-	$(top_srcdir)/build-aux/config.guess \
-	$(top_srcdir)/build-aux/config.sub \
-	$(top_srcdir)/build-aux/install-sh \
-	$(top_srcdir)/build-aux/ltmain.sh \
-	$(top_srcdir)/build-aux/missing
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_cxx_compile_stdcxx_11.m4 \
-	$(top_srcdir)/m4/boost.m4 $(top_srcdir)/m4/libtool.m4 \
-	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
-	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"
-LTLIBRARIES = $(lib_LTLIBRARIES)
-am__DEPENDENCIES_1 =
-am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1)
-pyenergy_la_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_2)
-am__objects_1 = pyenergy_la-helper.lo pyenergy_la-dataprocessor.lo \
-	pyenergy_la-libusbinterface.lo pyenergy_la-host_receiver.lo
-am_pyenergy_la_OBJECTS = $(am__objects_1) pyenergy_la-pymodule.lo
-pyenergy_la_OBJECTS = $(am_pyenergy_la_OBJECTS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-pyenergy_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
-	$(CXXFLAGS) $(pyenergy_la_LDFLAGS) $(LDFLAGS) -o $@
-PROGRAMS = $(bin_PROGRAMS)
-am_host_receiver_OBJECTS = host_receiver-helper.$(OBJEXT) \
-	host_receiver-dataprocessor.$(OBJEXT) \
-	host_receiver-libusbinterface.$(OBJEXT) \
-	host_receiver-host_receiver.$(OBJEXT)
-host_receiver_OBJECTS = $(am_host_receiver_OBJECTS)
-host_receiver_DEPENDENCIES = $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
-host_receiver_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CXXLD) \
-	$(AM_CXXFLAGS) $(CXXFLAGS) $(host_receiver_LDFLAGS) $(LDFLAGS) \
-	-o $@
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CXXFLAGS) $(CXXFLAGS)
-AM_V_CXX = $(am__v_CXX_@AM_V@)
-am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
-am__v_CXX_0 = @echo "  CXX     " $@;
-am__v_CXX_1 = 
-CXXLD = $(CXX)
-CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
-	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
-am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
-am__v_CXXLD_0 = @echo "  CXXLD   " $@;
-am__v_CXXLD_1 = 
-SOURCES = $(pyenergy_la_SOURCES) $(host_receiver_SOURCES)
-DIST_SOURCES = $(pyenergy_la_SOURCES) $(host_receiver_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
-	$(LISP)config.h.in
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-CSCOPE = cscope
-AM_RECURSIVE_TARGETS = cscope
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
-      || { sleep 5 && rm -rf "$(distdir)"; }; \
-  else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-DIST_TARGETS = dist-gzip
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BOOST_CPPFLAGS = @BOOST_CPPFLAGS@
-BOOST_LDPATH = @BOOST_LDPATH@
-BOOST_PYTHON3_LDFLAGS = @BOOST_PYTHON3_LDFLAGS@
-BOOST_PYTHON3_LDPATH = @BOOST_PYTHON3_LDPATH@
-BOOST_PYTHON3_LIBS = @BOOST_PYTHON3_LIBS@
-BOOST_PYTHON_CPPFLAGS = @BOOST_PYTHON_CPPFLAGS@
-BOOST_PYTHON_LDFLAGS = @BOOST_PYTHON_LDFLAGS@
-BOOST_PYTHON_LDPATH = @BOOST_PYTHON_LDPATH@
-BOOST_PYTHON_LIBS = @BOOST_PYTHON_LIBS@
-BOOST_REGEX_LDFLAGS = @BOOST_REGEX_LDFLAGS@
-BOOST_REGEX_LDPATH = @BOOST_REGEX_LDPATH@
-BOOST_REGEX_LIBS = @BOOST_REGEX_LIBS@
-BOOST_ROOT = @BOOST_ROOT@
-BOOST_SYSTEM_LDFLAGS = @BOOST_SYSTEM_LDFLAGS@
-BOOST_SYSTEM_LDPATH = @BOOST_SYSTEM_LDPATH@
-BOOST_SYSTEM_LIBS = @BOOST_SYSTEM_LIBS@
-BOOST_THREAD_LDFLAGS = @BOOST_THREAD_LDFLAGS@
-BOOST_THREAD_LDPATH = @BOOST_THREAD_LDPATH@
-BOOST_THREAD_LIBS = @BOOST_THREAD_LIBS@
-BOOST_THREAD_WIN32_LDFLAGS = @BOOST_THREAD_WIN32_LDFLAGS@
-BOOST_THREAD_WIN32_LDPATH = @BOOST_THREAD_WIN32_LDPATH@
-BOOST_THREAD_WIN32_LIBS = @BOOST_THREAD_WIN32_LIBS@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GREP = @GREP@
-HAVE_CXX11 = @HAVE_CXX11@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PYTHON_CPPFLAGS = @PYTHON_CPPFLAGS@
-PYTHON_LIBS = @PYTHON_LIBS@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@